Research on reversible effects and mechanism between the energy-absorbing and energy-reflecting states of chameleon-type building coatings

In the present paper, the reversible effects between energy-absorbing and energy-reflecting states of chameleon-type building coatings were studied through demonstration of the layers’ properties using infrared thermal imaging of the layers when exposed to a sunlamp or temperature measurements of the layers during exposure to sunlight at different ambient temperatures. The reversible transforming mechanism between the energy-absorbing and energy-reflecting states of the chameleon-type building coatings was investigated with IR, Raman and ¹H NMR spectroscopy. The infrared thermal image results showed that when reversibly thermochromic pigments were added to normal white building coatings, the chameleon-type building coatings could absorb energy from the sunlamp below a switching temperature of about 18°C. Absorption of energy from the sunlamp stopped automatically above the switching temperature. The results from exposure to solar radiation showed that when the temperature was below the switching temperature, the chameleon-type building coating could absorb almost the same amount of solar energy as an ordinary coloured coating, and when the temperature was above the switching temperature, the chameleon-type building coating could reflect more solar energy than the ordinary coloured coating. The above results showed that chameleon-type building coatings could contribute to a thermally comfortable building environment. The IR spectroscopy results showed that when the environmental temperature was below the switching temperature of 18°C, the lactone ring of the thermochromic pigment molecule would open and the band of C=O would almost disappear. Raman spectra indicated that the band of C–O in would move to the high wave number range. From ¹H NMR spectra, it could be found that there was some action between the hydrogen of the hydroxyl and the structure of . During the lactone ring opening, the electron in the non-bond orbital would transit to the higher orbital and it could elongate the conjugated bridge, which would produce visible absorption and hence produce an energy-absorbing effect. However, when the environmental temperature was above the switching temperature of 18°C, the lactone ring in the molecule of the thermochromic pigment would close, the transited electron would transit back to the original orbital, hence the visible absorption would disappear, which would make the coating have an energy-reflecting effect.     

基于充放电原理实现的微电容测量电路

具有抗分布电容以及简单实用等特性的充放电电路是目前微电容测量中广泛采用的一种测量电路。本文对基于充放电原理的微电容测量电路进行了深入研究，并介绍一种基于充放电原理的实用电路。     

φ1m氨合成塔20钢异径管失效分析

分析了氨合成塔底部副线20钢异径管爆破的原因。结果表明：异径管长期处于200℃以上工作，管内H2与管材中的碳或Fe3发生化学反应，生成CH4致使管内脱碳并产生裂纹，异径管强度降低脆性增加，导致爆破。     

陶瓷窑炉自控智能化有待解决的问题

人工神经网络及模糊控制在陶瓷窑炉自控系统中得到日益广泛的应用,它们自身的发展也不断推动陶瓷窑炉智能控制的开发及应用,但是在陶瓷窑炉自控智能化的进程中仍存在一些问题有待于解决。     

MPEG-4视频编码技术及其在多媒体通信中的应用

本文较为详细地介绍了MPEG－4视频编码的主要技术及其功能与特点，并基于此标准提出了一个基于Internet网络的多媒体通信系统的设计方案。     

古洞口水利水电工程泄洪洞工作弧门安装工艺

介绍了古洞口工程泄洪洞工作弧门在特定地形下采用固定卷扬式启闭机和汽车吊配合闸室的预埋件进行闸门安装的施工工艺。对闸门的吊装、调整及焊接工艺的具体措施作了详细分析,解决了该工作弧门在洞内安装的关键施工技术问题。     

轧机主传动万向联轴器辊端接头结构探讨

分析了衬板槽平面与叉头十字轴孔轴线的相对位置对辊端接头应力的影响 ,研究了轧辊扁头与衬板之间间隙所产生的冲击和应力集中 ,讨论了辊端接头中部过渡段结构对应力分布和制造质量的影响。提出辊端接头结构设计的优化方案     

熔融-固相缩聚法中固相聚合对聚乳酸合成的影响

以L 乳酸单体为原料 ,熔融 -固相缩聚法合成了聚乳酸 ,重点研究了固相聚合的工艺条件。结果表明 ,绝对压力 60Pa ,氯化亚锡为催化剂 ,分段控温 ,可使聚乳酸的粘均分子量提高到固相聚合反应前的 5 3倍。通过对固相聚合产物的结晶度和熔点的分析 ,探讨了固相聚合的机理。     

Effect of Synergistic Anticorrosion Treatments on Cycling Stability of Mg-Based Hydrogen Storage Electrode

In this paper, any two of the three anticorrosion agents, that is emulsifier (OP-10), soluble glass (Na2O·nSiO2) and glycerin (C3H8O3), were treated simultaneously on the surface of amorphous (a-) MgNi+5% Ml2Mg17 (Ml denotes the lanthanum-rich mish metal) electrode and the electrolyte. Effect of the synergistic anticorrosion treatment on charging/discharging cycle stability of the electrode was investigated. Contrasted with single treatment method, the cycling stability of the electrodes was further improved. The desirable synergistic anticorrosion method was that the electrode was treated by the soluble glass, and that OP-10 was added into the electrolyte. The cyclic voltammogram (CV) results of the electrode show clearly that the anticorrosion agent can change the electrochemical activity and mechanism of the electrode. The concentration of the anticorrosion agent in the electrolyte treated by the synergistic anticorrosion method was also investigated. The appropriate concentration of the anticorrosion agents in the electrolyte is 0.143%.     

A new polysilicon CMOS self-aligned double-gate TFT technology

In this paper, a new polysilicon CMOS self-aligned double-gate thin-film transistor (SA-DG TFT) technology is proposed and experimentally demonstrated. The self-alignment between the top- and bottom-gate is realized by a backlight exposure technique. The structure has an ultrathin channel region (300 /spl Aring/) and a thick source/drain region. Experimental results show that this technology provides excellent current saturation due to a combination of the effective reduction in the drain field and the full depletion of the ultrathin channel. Moreover, for n-channel devices, the SA-DG TFT has a 4.2 times higher on-current (V/sub gs/=20V) as compared to the conventional single-gate TFT. Whereas for the p-channel devices, the SADG TFT has a 3.6 times higher on-current (V/sub gs/=-20V) compared to the conventional single-gate device.